Common Problems with Automatic Overhead Garage Doors
If the garage in your home is fitted with an automatic overhead door, it is essential that you understand how to maintain the equipment. It is also vital that you understand the causes of potential problems so you can take action to repair your garage door. This article will tell you all that you need to know.
Maintenance of overhead garage doors
The door on your garage will typically see a lot of action as you get your car out and put it away when you return home. This means that it can experience a lot of wear and tear. If you do not carry out regular maintenance, you will greatly increase the chance that a malfunction will occur. You should periodically check that the runners are clear of debris and are well lubricated. If you do not feel confident doing this, you should call out a garage door contractor who will service the garage door for you.
Common problems which affect overhead garage doors
Dirty sensors
Automatic garage doors are operated using sensors and electronic motors which allow you open the door without needed to physically touch it. However, if the sensors on the door become dirty, they may no longer function as they should. You can fix this problem by wiping the sensor to remove any dust or debris.
Debris on the runners
Even with regular maintenance, debris can still cause problems. If debris falls down from the roof of your garage, it can easily become jammed in the runners which the door moves on. If debris has become trapped in the runners, you will find that your garage door only partially opens or closes before it stops moving completely. You may also hear a strange sound as the runner wheels on the garage door run over the debris. To fix this problem, you simply need to clean the runners. However, in some cases, the debris may cause the wheels on the garage door to jump off the runners. If this occurs, you may need the help of a garage door repair contractor to help you to fix the problem.
Problems with the disconnect switch
Automatic overhead garage doors are fitted with a disconnect switch, which allows you to switch the operating system to manual mode so you can operate the door by hand. However, if this switch develops a fault, you may find that your automatic garage door opener does not work. A garage door will be able to repair the switch.
For further information, contact a garage door repair service today.
Share
